Water Treatment for the Paper and Packaging Industry
Water quality for stock preparation, the paper machine and the steam line; filtration and recovery of the white water that circulates.
Papermaking is one of the most water-intensive industries. Fibres are turned into stock with water, separated from the water on the wire of the paper machine, and the remaining water is removed in the presses and on the drying cylinders. Most of the white water leaving the machine returns to the circuit. This circuit lowers water intake, but dissolved matter, fines and microbiological load build up over time; deposits, foam and biological growth can cause downtime and defects in the paper.
On the fresh water side the need varies from line to line. Wire and felt showers require water free of suspended solids, and boiler feedwater needs a separate quality class. In packaging conversion and printing plants consumption is markedly lower; the need is mostly humidification, ink and adhesive preparation, and cooling water. In both types of plant we start with a raw water analysis and a site inspection.
The decisive quality
Stock and paper machine
The hardness and dissolved solids load of the water used for stock dilution and at the machine change how well chemical additives work. Suspended solids, hardness and microbiological load are decisive; substances that build up in the circuit affect paper quality and machine efficiency.
Wire and felt showers
The high-pressure showers that continuously clean the wires and felts have narrow nozzles. The decisive parameter is suspended solids; poorly filtered water clogs the nozzles, impairs cleaning and shortens felt life. Filtered white water can be used in the showers, but its quality has to be monitored continuously.
Boiler and drying steam
The drying cylinders are heated with steam and the condensate returns to the boiler. Hardness, conductivity and silica are controlled in the feedwater; whether fibre or process leaks are entering the condensate return must also be monitored. Condensate return is a major item of energy saving; diverting contaminated condensate in time protects the boiler.
Packaging, printing, humidification
On corrugated board, printing and converting lines water is used for starch adhesive, ink and air humidification. In humidification, hardness remains as scale on the nozzles and as white dust in the room, which is why water treated by reverse osmosis is preferred.
Systems that matter in this sector
Filtration Systems
Retains suspended solids at the fresh water intake and in the white water circuit; it protects the shower nozzles and the stages downstream and helps control the fine material that builds up in the circuit.
View system →Ultrafiltration (UF) Systems
Retains colloids and fines in white water and treated waste water, producing a permeate that can be used as shower water; on the recovery line it is the pre-stage for reverse osmosis.
View system →Water Recovery Plants
Makes excess white water from the machine and treated waste water reusable according to their contamination profile; fresh water intake and discharge fall together.
View system →Water Softening Systems
Removes hardness on the boiler feed line and ahead of reverse osmosis; it limits scaling, and the efficiency loss that follows, in the boilers that produce drying steam.
View system →Reverse Osmosis Systems
Removes dissolved salts for boiler feedwater and for humidification water in packaging plants; it prevents scale on the nozzles and mineral dust in the room.
View system →
Work out your line in a few steps
The solution finder opens with this sector selected; choose your water source and goal and it shows the treatment stages that fit.
Frequently asked questions
How is white water reused in a paper mill?
Part of the white water leaving the machine is used directly for stock dilution. The excess can be brought to shower water quality by filtration after passing through the fibre recovery units. To reduce fresh water demand further, ultrafiltration and, where necessary, reverse osmosis are added. How far you can close the circuit is limited by the build-up of dissolved matter and by paper quality; the balance point is determined for each mill.
Why do biological deposits form on a paper machine?
In a closed circuit the water is warm and contains organic matter and starch; these conditions favour the growth of bacteria and fungi. The growth forms biofilm on tank and pipe surfaces, and pieces that break away can cause holes and spots in the paper. Reducing the suspended solids and organic load entering the circuit makes the biocide programme more effective. The chemical programme and the water treatment arrangement should be addressed together.
Do packaging and printing plants need water treatment?
Although consumption is low compared with papermaking, there is a quality expectation. When a humidification system runs on hard water the nozzles clog and mineral dust settles on the product; in ink and adhesive preparation, variable water quality undermines the consistency of the recipe. In these plants filtration together with a small reverse osmosis or softening stage is usually sufficient; the decision is based on the raw water analysis.
Sectors with similar needs
Water Treatment and Softening for Hotels and Hospitals
A treatment arrangement for drinking and utility water, the hot water line and heating–cooling circuits, and for equipment feedwater in healthcare facilities.
View →Water Treatment for the Food and Beverage Industry
Industrial water treatment arrangements that meet the different quality requirements of product water, line cleaning, steam and cooling separately.
View →Water Treatment for the Textile and Dyehouse Industry
Water treatment that controls hardness, iron and colour on pretreatment, dyeing and finishing lines and plans for the reuse of dyehouse waste water.
View →
Send us your raw water analysis and the flow rate you need
Let us size the system together; we will survey the site in person if needed.

