Complete lines that build the water quality your production needs, starting from the raw water analysis.
Every production line needs a different water quality: one is affected by hardness, another by conductivity, a third by silica or bacterial load. Process water preparation means delivering the quality the process genuinely needs with the fewest possible stages.
We begin with the raw water analysis and the process’s water quality requirement; then we combine filtration, softening, membrane and disinfection stages to the extent actually needed.
The raw water analysis and the process quality requirement are established.
The minimum necessary set of stages is chosen; unnecessary investment is eliminated.
The unit is manufactured, the site piping and the control panel are installed.
The system is started up, settings are made and the operators are briefed.
Hardness and colour control on dyeing and finishing lines.
Microbiological safety in water that contacts the product.
Conductivity control on surface treatment and rinsing lines.
High-purity water in boiler and turbine circuits.
The most expensive mistake in water treatment is targeting a higher quality than the process needs. An unnecessary membrane stage permanently raises the investment as well as the energy and consumable costs.
That is why we start a project by asking which water this process wants, not which device we can sell. Our efficiency calculations are the basis for that decision.
We can hold a preliminary discussion, but binding engineering requires a raw water analysis; a capacity given without one is an estimate.
Not necessarily. With a system analysis and improvement, the existing line can often be revised to reach the target.
Yes, our periodic inspection and technical service are the continuation of commissioning.
High-recovery industrial reverse osmosis units for process and boiler feedwater.
View →Resin softeners for hardness removal; resin replacement and regeneration tuning.
View →Complete system delivery with filter face piping, control panel and field installation.
View →Let us size the system together; we will survey the site in person if needed.
