Water Treatment Systems for Agriculture and Livestock
Control of iron, manganese, hardness and microbiological load on irrigation and animal drinking water lines fed from wells.
On farms and livestock operations water usually comes from a well and, unlike mains water, has not been treated beforehand. The composition of well water varies with the region, the depth and the season; iron, manganese, hardness and suspended solids are common in these sources. The same well often feeds both the irrigation line and the animal drinking water, but the two uses face different problems: on irrigation it is clogging, on drinking water it is microbiological safety.
That is why we start with a raw water analysis and a visit to the site. The analysis shows which parameter is actually the problem. On the irrigation side the aim is water clean enough to protect the emitters and filters; on the drinking water side it is disinfected water that protects animal health and the drinker lines. On most farms the most balanced arrangement is a shared pretreatment followed by separate stages for each of the two lines.
The decisive quality
Drip irrigation
Emitter openings in drip and micro-sprinkler systems are very narrow. Sand, suspended solids and the precipitate that dissolved iron and manganese form on contact with air clog these openings. The decisive parameters are suspended solids, iron and manganese; hardness can also cause scale build-up at the emitter tip.
Animal drinking water
Drinker lines in poultry houses, barns and pens are long and run at low flow, which creates conditions favourable to biofilm. Microbiological safety is the decisive factor. Iron and manganese spoil the taste of the water and build up in nipples and drinkers, narrowing the flow.
Greenhouses and fertigation
In greenhouses fertiliser is delivered with the irrigation water. The hardness and bicarbonate content of the water affect the balance of the nutrient solution and precipitation in the emitters; in soilless cultivation salinity is monitored as well. Some growers blend membrane-treated water with raw water.
Milking parlour and washing
Water used for milking equipment, the milk cooling tank and equipment washing comes into indirect contact with the product. Microbiological safety and hardness are decisive here: hard water reduces the effect of cleaning chemicals and leaves scale on stainless steel surfaces.
Systems that matter in this sector
Filtration Systems
Filter stages designed together with oxidation retain suspended solids, iron and manganese in well water. Protecting the emitters and the stages downstream depends on this stage.
View system →Drinking Water Preparation Systems
Combines filtration and disinfection stages for animal drinking water and for farm staff; biofilm control in the drinker lines is part of the disinfection plan.
View system →Water Softening Systems
Removes hardness on milking parlour, washing and hot water lines, reducing scale formation and chemical consumption. Softening all of the irrigation water is generally unsuitable because it adds a sodium load to the soil.
View system →Reverse Osmosis Systems
Produces low-salinity water from saline well water for greenhouses and soilless cultivation; the permeate is usually blended with raw water. Where the concentrate will go is addressed separately in the project.
View system →
Work out your line in a few steps
The solution finder opens with this sector selected; choose your water source and goal and it shows the treatment stages that fit.
Frequently asked questions
Why does iron clog drip irrigation?
In water drawn from a well, iron is usually dissolved and invisible. When the water comes into contact with air the iron oxidises, forms a precipitate and builds up in the emitter openings; iron bacteria accelerate this build-up. That is why a screen or disc filter alone may not be enough; the iron has to be oxidised first and then retained in a filter. The arrangement is set by the raw water analysis.
What treatment does animal drinking water need?
The analysis of the well water comes first. Turbidity and suspended solids are removed by filtration, iron and manganese by oxidation and filtration; the final step is disinfection. On long drinker lines periodic cleaning of the line and monitoring of residual disinfectant are also part of the plan, because treated water can deteriorate again in a dirty line.
Does irrigation water need to be softened?
Generally not. Resin softening exchanges calcium and magnesium for sodium; continuous irrigation with this water can lead to sodium accumulation in the soil and damage to soil structure. If hardness causes problems in the emitters, periodic acid cleaning of the line, suitable filtration or blending in membrane-treated water are considered instead.
Sectors with similar needs
Pure Water Systems for Pharmaceuticals and Cosmetics
Product-ingredient water prepared with reverse osmosis and EDI, with microbiological control on the distribution loop and traceable operation.
View →Water Treatment and Process Water for the Chemical Industry
A water treatment arrangement that feeds the different quality classes of reaction, washing, boiler and cooling lines from a shared pretreatment.
View →Automotive Water Treatment and Paint Shop Water
Low-conductivity water for pretreatment, electrocoat and final rinse lines, with cooling tower water and rinse water recovery.
View →
Send us your raw water analysis and the flow rate you need
Let us size the system together; we will survey the site in person if needed.

